Managed Switch

• The M4500-48XF8C switch provides 48-port SFP28 (25G, 10G and 1G fiber)
• And it also provides 8-port QSFP28 (100G, 50G and 40G fiber)
• SFP28 ports are preconfigured for 10G, QSFP28 ports for 100G
• 4Tbps non-blocking fabric for 48 x 25G and 8 x 100G bi-directional
• Two modular power supplies APS750W are pre-installed for 1+1 redundancy
• Six modular fan trays AFT402 are pre-installed for 4+2 redundancy
• Two mounting ears and screws for rack mounting (front)
• One set of rail kits for rack mounting (back)
• Out-of-band 1G Ethernet Management port
• RJ45 RS232 console port and USB storage port
• L2/L3/L4 rich services for AV over IP (certified SDVoE-ready)
• Enhanced IGMP Plus for plug & play L2 Multicast between M4300/M4500 switches
• Line-rate spine and leaf with M4500-32C (32-port QSFP28)
• Static and dynamic routing with VRRP, OSPF, BGP, VRF-Lite and PIM-SM/SSM
• 68dB @25°C / 77°F

M4500 Series Features

Introducing two new, preconfigured M4500 100GE switches: M4500-32C and M4500-48XF8C. The trend of moving matrix switching into the Ethernet network is accelerating and a new class of switches has come to market. Combining the configurability of a matrix switch with the power and scalability of Ethernet, they support hundreds of AV over IP endpoints, at a price point dramatically lower than comparable matrix switches. The Layer 3 feature set includes static and dynamic routing with VRRP, OSPF, BGP, VRF-Lite and PIM. Removing the need for PIM routing, these new switches offer IGMP Plus and greatly simplify system architectures with the same well-known IGMP techniques across the entire AV over IP network while still operating at Layer 2. Installers opting to use M4500-48XF8C switch in their installation will find that it is already preconfigured out of the box. It comes with 48 10G Fiber ports with 8 100G uplink ports with true
AV and multicast Zero Touch network configuration. Connect AV over IP encoders and decoders, and power on the switch. It just works! Then use the M4500-32C switch to aggregate the edge switches for a complete set up in large projects up to 320x320 SDVoE (10Gb) devices in a single architecture.

Key features

• Cost effective 100G aggregation and 10G access layer for AV deployments and redundant spine & leaf topologies
• Zero Touch AV-over-IP with pre-configured L2 Multicast on all models (10G AV encoders and decoders) and SDVoE-ready
• Advanced Layer 3 feature set including IP Multinetting/CIDR, Static, PBR, VRRPv2, OSPFv3, PIM-SM, VxLAN, BGP4, VRF-Lite
• Optimized for “Spine and Leaf” redundant AV installations, with or without MLAG between spine switches
• Up to 320 TX / 320 RX (10 Gigabit) Nodes all line rate with each other in a redundant spine and leaf architecture
• 2 power supply units (APS750W) and 6 redudant fan trays (AFT402) pre-installed for 1+1 power and 4+2 fan redundancy
• Ultra-low latency (spine 0.13µs @100G; leaf 0.119µs @10G) and scalable table size (32K MAC, 8K ARP, 4K VLANs, 32K routes)

Software

• Advanced classifier-based, time-based hardware implementation for L2 (MAC), L3 (IP) and L4 (UDP/TCP) security and prioritization
• Selectable Port-Channel / LAG (802.3ad - 802.1AX) L2/L3/L4 hashing for fault tolerance and load sharing with any Ethernet channeling
• Up to 64 Link Aggregation Groups (LAG, Port-Channel, LACP) with 32 ports per LAG and Multi-chassis Link Aggregation (MLAG)
• Comprehensive IPv4/IPv6 static and dynamic routing including IP Multinetting/CIDR, PBR,
VRRPv2, OSPFv3, PIM-SM6, BGP4, VRF-Lite
• Enhanced IPv4/IPv6 multicast forwarding with IGMPv3/MLDv2 and IGMP Plus enhancement at the VLAN level
• IGMP Plus enhanced implementation for automatic multicast across a L2 network (igmp-plus easy macro-command)
• High performance IPv4/IPv6 multicast routing with PIM-SM and PIM-SM6 associated with unicast static routes, or other L3 protocol
• Advanced IPv4/IPv6 security including malicious code detection, DHCP Snooping, IP Source Guard, and Control Plane Policing (CoPP)
• Priority-Based Flow Control (PFC), DCBX Bridging, Enhanced Transmission Selection (ETS) and VXLAN Gateway for server installations

Availability

• Two (2) redundant, modular power supplies are pre-installed contributing to business continuity management
• Six (6) hot-swappable fan trays are pre-installed for 4+2 fan redundancy
• Spine and leaf architecture with every leaf switch (10G/25G access) connecting to every spine switch (distributed 100G core)
• Up to 48 paths ECMP routing for load balancing and redundancy
• Link Dependency feature enables or disables ports based on the link state of different ports Management
• Industry standard SNMP, RMON, MIB, LLDP, AAA, sFlow and RSPAN remote mirroring implementation
• Service port for out-of-band 1 Gigabit Ethernet management (OOB)
• Standard RS232 straight-through RJ45 for local management console (USB 2.0 to RS232 converter with PL203 chipset is advised)
• Non-Disruptive Configuration for applying a new configuration file without disrupting the operation of unchanged features
• Industry standard command line interface (CLI) only NETGEAR warranty
• M4500 series is backed by a NETGEAR ProSAFE® Limited Lifetime Hardware Warranty*
• Lifetime Next Business Day Hardware Replacement
• ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues. ProSUPPORT
coverage can be extended by purchasing one, three, or five year contracts)
• ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat.

EAN # : 606449145694